Taprite CO2 Primary Beer Regulator with Dual High Pressure Gauge

The Taprite CO2 Primary Regulator with Dual Gauges is part of the Taprite economy series. This primary carbon dioxide regulator is easy to use and maintain, with a set screw adjustment that makes it a "set and forget" tool for maintaining constant pressure in your system. The regulator's zinc bonnet and brass body and fittings help to minimize the chance for freeze-ups during peak usage, and it is corrosion-resistant and highly durable in several environments.

This one-pressure one-product regulator has a CGA320 inlet, a 1/4" flare outlet with a check valve, and 160 lb. and 2000 lb. gauges, allowing you to monitor both your output pressure and the amount of CO2 remaining in your tank.

Carbon Dioxide regulators are gas cylinder regulators that control the amount of CO2 dispensed for various applications. Some CO2 regulators have flow restrictors that ensure the delivery of the gas at a constant rate. These are often used inside draft beer kegerators to dispense just the right amount of gas to get the perfect foam beer.

Maintaining accurate pressure in the tank is crucial, as it determines the quality of the beer dispensed. To get that perfectly carbonated beer, the CO2 regulator must be set at an optimum pressure level. When the pressure is too high, it results in an extremely foamy beer, while on a lower pressure, the excess foam looks loose and the beer soon becomes flat. Therefore, setting an optimum pressure in your CO2 regulator is important.

To adjust the level of gas pressure, you need to close the shut-off valve placed on the bottom of the regulator that is connected to the hose which goes into the keg. After this, the screw can be turned clockwise or anticlockwise to increase or decrease the pressure respectively. Then, you would require expelling the pressure in the hose and opening the valve at the regulator.

The Taprite CO2 Primary Regulator with Dual Gauges features a QUALITY CONSTRUCTION, with a Solid Brass Body and Zinc Bonnet. It has a WORKING PRESSURE RANGE of 0-120 PSI, a TANK PRESSURE GAUGE of 0-2000 PSI, a 1/4" MFL Flare Outlet with Check, and a CGA320 Valve input.

product information: